In order to re-enter normal operational model, simply remove and replace power to the device. Reboot the beacon into Direct Firmware Update mode.Ĭontact Radius Networks support for information on the procedure for firmware update or replacement. Press the Action Menu button and select DFU. In order to re-enter configurable mode for a RadBeacon X2, remove the front cover and switch the beacon power switch to OFF and back to ON.Ī beacon set in configurable mode will be configurable for up to 30 minutes or until you lock the device again. In order to re-enter configurable mode for a RadBeacon Tag, remove the front cover and press the configuration push button switch near the coin cell battery. In order to re-enter configurable mode for a RadBeacon USB, remove and restore power to the device. The Lock feature is a security precaution to limit the possibility of third party manipulation of your beacons once they have been installed and configured. Submit a valid PIN to prevent connections from remote Bluetooth 4.0 devices to the beacon configuration service. Press the Action Menu button and select Lock. Submit a valid PIN to reset the settings for your beacon to factory defaults. Reset the device to the original factory settings. Press the Action Menu button and select Reset. Submit a new and existing PIN to update the PIN for your beacon. Press the Action Menu button and select Update PIN. Ruggedized and weatherproof, the RadBeacon E4 gets maximum battery life from 4 user-replaceable AA batteries and can be flexibly installed in. The RadBeacon E4 provides seamless proximity services for both iOS and Android mobile devices. Validate the accuracy of your beacon settings by quickly verifying the ranging behavior of your device in proximity to your configured beacon. RadBeacon E4 is an all-weather, long-life Bluetooth Smart proximity multi-beacon using iBeacon, AltBeacon, and Eddystone technology, including Physical Web. Press the Action Menu button and select Range. Update the measured power value with the results of your calibration activity and update your settings. Press the Action Menu button and select Calibrate.Ĭalibrate the measured power value of the beacon settings to ensure optimal proximity events and ranging. Submit a valid PIN to update the settings for this beacon. (If the RadBeacon is not configurable, then an "unable to connect" message will be displayed after approximately 15 seconds.) The settings displayed include: If the RadBeacon is configurable, its detailed settings will be displayed. Each beacon discovered is displayed with the following summary details Scan for nearby configurable RadBeacons by pressing the SCAN button. Once discovered, if the beacon is configurable, you can display each beacon's operating settings and make modifications to those settings. With the RadBeacon app you can scan for nearby Radius Networks beacons. The RadBeacon app from Radius Networks requires an Android device running Android 4.3 or higher and equipped with Bluetooth 4.0 capabilities. See the RadBeacon USB Datasheet for more information.The RadBeacon™ app is the configuration utility for RadBeacon proximity beacons from Radius Networks that support Apple's iBeacon™ proximity services and the AltBeacon proximity services for Android devices. RadBeacon is certified and licensed by the FCC, CE, Bluetooth and more. However, we recommend using our official RadBeacon USB Power Supply. You can use any USB AC adaptor, car adaptor, or computer with a spare USB port. RadBeacon USB is powered from any standard USB port. Supported beacon proximity technologies include: If interested, please reach out to us at Multi-BeaconĪs the industry’s first multi-beacon, with concurrent support for all major industry-standard proximity technologies, the RadBeacon USB enables simultaneous proximity services across iOS, Android, and other emerging mobile environments. RadBeacon USB is a fully standalone Bluetooth Smart™ proximity beacon implemented in a tiny USB package.įor large volume orders, our team can custom configure units prior to shipping.
0 Comments
Leave a Reply. |